 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: * The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications * The IC06 74HC/HCT/HCU/HCMOS Logic Package Information * The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines 74HC/HCT9114 Nine wide Schmitt trigger buffer; open drain outputs; inverting Product specification Supersedes data of March 1988 File under Integrated Circuits, IC06 December 1990 Philips Semiconductors Product specification Nine wide Schmitt trigger buffer; open drain outputs; inverting FEATURES * Schmitt trigger action on all data inputs * Output capability: standard (open drain) * ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT9114 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT9114 are nine wide Schmitt trigger inverting buffer with open drain outputs and Schmitt trigger inputs. 74HC/HCT9114 The Schmitt trigger action in the data inputs transform slowly changing input signals into sharply defined jitter-free output signals. The 74HC/HCT9114 have open-drain N-transistor outputs, which are not clamped by a diode connected to VCC. In the OFF-state, i.e. when one input is LOW, the output may be pulled to any voltage between GND and VOmax. This allows the device to be used as a LOW-to-HIGH or HIGH-to-LOW level shifter. For digital operation and OR-tied output applications, these devices must have a pull-up resistor to establish a logic HIGH level. The "9114" is identical to the "9115" but has inverting outputs. QUICK REFERENCE DATA GND = 0 V; Tamb = 25 C; tr = tf = 6 ns TYPICAL SYMBOL tPHL/ tPLZ CI CPD Notes 1. CPD is used to determine the dynamic power dissipation (PD in W): PD = CPD x VCC2 x fi + (CL x VCC2 x fo) where: fi = input frequency in MHz fo = output frequency in MHz (CL x VCC2 x fo) = sum of outputs CL = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI = GND to VCC For HCT the condition is VI = GND to VCC - 1.5 V ORDERING INFORMATION See "74HC/HCT/HCU/HCMOS Logic Package Information". PARAMETER propagation delay An to Yn input capacitance power dissipation capacitance per buffer notes 1 and 2 CONDITIONS HC CL = 15 pF; VCC = 5 V 12 3.5 5 HCT 13 3.5 5 ns pF pF UNIT December 1990 2 Philips Semiconductors Product specification Nine wide Schmitt trigger buffer; open drain outputs; inverting PIN DESCRIPTION PIN NO. 1, 2, 3, 4, 5, 6, 7, 8, 9 10 19, 18, 17, 16, 15, 14, 13, 12, 11 20 SYMBOL A0 to A8 GND Y0 to Y8 VCC 74HC/HCT9114 NAME AND FUNCTION data inputs ground (0 V) data outputs positive supply voltage alfpage 1 A0 Y0 19 alfpage 1 19 2 A1 Y1 18 2 18 3 A2 Y2 17 3 17 4 A3 Y3 16 4 16 5 A4 Y4 15 5 15 6 A5 Y5 14 6 14 7 A6 Y6 13 7 13 8 A7 Y7 12 8 12 9 A8 Y8 MBA015 11 9 MBA014 11 Fig.1 Pin configuration. Fig.2 Logic diagram. Fig.3 IEC logic diagram. December 1990 3 Philips Semiconductors Product specification Nine wide Schmitt trigger buffer; open drain outputs; inverting 74HC/HCT9114 handbook, halfpage Yn An GND MBA021 Fig.4 Functional diagram. Fig.5 Logic diagram (one Schmitt trigger). FUNCTION TABLE INPUTS An L H Notes 1. H = HIGH voltage level L = LOW voltage level Z = high impedance OFF-state OUTPUTS Yn Z L December 1990 4 Philips Semiconductors Product specification Nine wide Schmitt trigger buffer; open drain outputs; inverting DC CHARACTERISTICS FOR 74HC For the DC characteristics see "74HC/HCT/HCU/HCMOS Logic Family Specifications". Transfer characteristics are given below. Output capability: standard ICC category: MSI TRANSFER CHARACTERISTICS FOR 74HC Voltages are referred to GND (ground = 0 V) Tamb (C) 74HC SYMBOL PARAMETER +25 min. typ. max. 74HC/HCT9114 TEST CONDITIONS UNIT V CC WAVEFORMS (V) V 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 Fig.6 -40 to +85 min. max. -40 to +125 min. max. VT+ positive-going threshold negative-going threshold 0.70 1.75 2.30 0.30 1.35 1.80 1.13 1.50 2.37 3.15 3.11 4.20 0.70 1.10 1.80 2.40 2.43 3.30 0.43 0.80 0.57 1.00 0.68 1.10 0.70 1.75 2.30 0.30 1.35 1.80 0.18 0.40 0.50 1.50 3.15 4.20 1.10 2.40 3.30 0.80 1.00 1.10 0.70 1.75 2.30 0.30 1.35 1.80 0.15 0.40 0.50 1.50 3.15 4.20 1.10 2.40 3.30 0.80 1.00 1.10 VT- V Fig.6 VH hysteresis (VT+ - VT-) 0.2 0.4 0.5 V Fig.6 AC CHARACTERISTICS FOR 74HC GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (C) 74HC SYMBOL PARAMETER +25 min. typ. max. TEST CONDITIONS UNIT V CC WAVEFORMS (V) ns 2.0 4.5 6.0 2.0 4.5 6.0 Fig.7 -40 to +85 min. max. -40 to +125 min. max. tPHL/ tPLZ propagation delay An to Yn output transition time 36 13 10 19 7 6 110 22 19 75 15 13 140 28 24 95 19 16 165 33 28 110 22 19 tTHL ns Fig.7 December 1990 5 Philips Semiconductors Product specification Nine wide Schmitt trigger buffer; open drain outputs; inverting DC CHARACTERISTICS FOR 74HCT For the DC characteristics see "74HC/HCT/HCU/HCMOS Logic Family Specifications". Transfer characteristics are given below. Output capability: standard ICC category: MSI 74HC/HCT9114 Note to HCT types The value of additional quiescent supply current (ICC) for a unit load of 1 is given in the family specifications. To determine ICC per input, multiply this value by the unit load coefficient shown in the table below. INPUT An UNIT LOAD COEFFICIENT 0.3 TRANSFER CHARACTERISTICS FOR 74HCT Voltages are referred to GND (ground = 0 V) Tamb (C) SYMBOL PARAMETER +25 min. typ. max. TEST CONDITIONS UNIT V CC WAVEFORMS (V) V V V 4.5 5.5 4.5 5.5 4.5 5.5 Fig.6 Fig.6 Fig.6 74HCT -40 to +85 min. max. -40 to +125 min. max. VT+ VT- VH positive-going threshold negative-going threshold 0.9 1.2 0.7 0.8 1.50 2.0 1.70 2.1 1.06 1.4 1.27 1.7 0.44 0.8 0.44 0.8 0.9 1.2 0.7 0.8 0.2 0.2 2.0 2.1 1.4 1.7 0.8 0.8 0.9 1.2 0.7 0.8 0.2 0.2 2.0 2.1 1.4 2.7 0.8 0.8 hysteresis (VT+ - VT-) 0.2 0.2 AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (C) SYMBOL PARAMETER +25 min. typ. max. TEST CONDITIONS UNIT V CC WAVEFORMS (V) ns ns 4.5 4.5 Fig.7 Fig.7 74HCT -40 to +85 min. max. -40 to +125 min. max. tPHL/ tPLZ tTHL propagation delay An to Yn output transition time 17 7 31 15 39 19 47 22 December 1990 6 Philips Semiconductors Product specification Nine wide Schmitt trigger buffer; open drain outputs; inverting TRANSFER CHARACTERISTIC WAVEFORMS 74HC/HCT9114 Fig.6 Transfer characteristic. AC WAVEFORMS tr handbook, full pagewidth tf 10 % A n INPUT VM (1) 90 % t PLZ t PZL Y n OUTPUT 10 % MBA024 VM (1) t THL (1) HC : VM = 50%; VI = GND to VCC. HCT: VM = 1.3 V; VI = GND to 3 V. Fig.7 Waveforms showing the input (An) to output (Yn) propagation delays and the output transition times. PACKAGE OUTLINES See "74HC/HCT/HCU/HCMOS Logic Package Outlines". December 1990 7 |
Price & Availability of 74HCHCT9114
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |